Hi All
We have already closed FI fiscal year but FI-AA fiscal year is still opened. All the balance of assets are transfered to next fiscal year but one asset of CWIP asset class balance are not being transferred to next fiscal year. They are appearing in G/L but every time I run asset balance report for example AW01N and AR02 in new fiscal year it is just reflecting next fiscal year acquisition.
Hello Experts,
We have requirement to have the custom report on accruals, where all the COPA value fields and characteristics are to be populated in the report output.
Please not New GL is activated in the system.
So the logic we build is to fetch the COPA data for particular GL account say Warranty or Revneue is -
Fetch the COAP data on the basis of profitability segment no # found from BSEG table for the document no and on the basis of PA segment no# get KEYCE4 data from CE41000_ACCT. Then on the basis of KEYCE4 will got to the CE41000 table and fetch the required characteristics.
Also have requirement to get COPA value fields as well. So to fetch the COPA value fields like Sales qty, freight, revenue etc we need to look into CE11000. That can be achieve by passing the PA segment no # from CE41000_ACCT and ref.key from BKPF.
But in some cases the KEYCE4 in table CE41000_ACCT are same for 2 line items. So how to fetch the data from CE11000 in these cases.
Also let me know if my logic built in wrong.
Dear Experts,
I need a stored procedure for below scenario.
Scenario: If a customer state is Null, Then for that customers sales order should not be added.
Kindly help me out.
Thanks & Regards,
Hiren
Hello:
I have an error while using epmcopyrange.
In the attached picture, you can see a simple report where I use the formula but i get #Value.
What else is missing?
Please, you help.
Thank you!
Luciana
For sender SOAP channel the web service url can be obtained in two ways:
1) Short URL - http://hostname:port/dir/wsdl?p=ic/3edrfderftc53ebghjyhgfds4ba8a16c
2) Long URL - http://hostname:port/XISOAPAdapter/MessageServlet?senderParty=&senderService=WEBSERVICE_Component&receiverParty=&receiverService=&interface=si_newWebService&interfaceNamespace=http%3A%2F%2Fwebservicetest%2Fsd%2Fnew
If legacy calls short url where does the resolution from the short to long url happens?
What are the pros and cons of using one over the other?
Hi
Below is the stored procedure that ristrics users other than manager to update open A/R invoices. But the validation is not allowing the manager to update the invoice. So need help to get validation correctly.
if @object_type='13' and @transaction_type = 'U'
if exists(SELECT Top 1(T0.[DocNum]) FROM OINV T0 Inner Join dbo.OUSR T2 On T0.UserSign=T2.UserId
WHERE
T2.UserID not in ('01') and T0.DocStatus <> 'O' and T0.[DocNum] = @list_of_cols_val_tab_del)
BEGIN
set @error = '-007'
set @error_message = 'Contact Manager to Close / Cancel invoice'
END
Regards,
Karthik B
trc file: "dev_disp", trc level: 1, release: "700"
---------------------------------------------------
sysno 00
sid NSR
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2008
Sat Jan 16 20:31:01 2016
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2008) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat Jan 16 20:31:06 2016
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >NSAP_NSR_00 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DA30050, size: 6342672)
DpShMCreate: allocated sys_adm at 000000000DA30050
DpShMCreate: allocated wp_adm at 000000000DA32150
DpShMCreate: allocated tm_adm_list at 000000000DA36C80
DpShMCreate: allocated tm_adm at 000000000DA36CE0
DpShMCreate: allocated wp_ca_adm at 000000000DF9AB80
DpShMCreate: allocated appc_ca_adm at 000000000DFA0940
DpShMCreate: allocated comm_adm at 000000000DFA2880
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000E029510
DpShMCreate: allocated gw_adm at 000000000E029590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000E0295C0
DpShMCreate: allocated wall_adm at 000000000E0295D0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sat Jan 16 20:31:07 2016
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = D:\usr\sap\NSR\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\NSR\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\NSR\SYS\profile\NSR_DVEBMGS00_NSAP
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=NSR
argv[7] = -DSAPMYNAME=NSAP_NSR_00
argv[8] = -DSAPPROFILE=D:\usr\sap\NSR\SYS\profile\NSR_DVEBMGS00_NSAP
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( NSAP) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >NSAP_NSR_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Sat Jan 16 20:31:09 2016
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 956
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:58742) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sat Jan 16 20:31:47 2016
*** ERROR => DpHdlDeadWp: W0 (pid 2736) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W1 (pid 3508) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W2 (pid 3024) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W3 (pid 4012) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W4 (pid 3968) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W5 (pid 2912) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => DpHdlDeadWp: W6 (pid 3672) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => DpHdlDeadWp: W7 (pid 1344) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => DpHdlDeadWp: W8 (pid 2640) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W9 (pid 3536) died [dpxxdisp.c 14532]
*** ERROR => DpHdlDeadWp: W10 (pid 3608) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => DpHdlDeadWp: W11 (pid 3424) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => DpHdlDeadWp: W12 (pid 2928) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:31:57 2016
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Jan 17 04:31:57 2016
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA 2736 Ended no 1 0 0
1 DIA 3508 Ended no 1 0 0
2 DIA 3024 Ended no 1 0 0
3 DIA 4012 Ended no 1 0 0
4 DIA 3968 Ended no 1 0 0
5 DIA 2912 Ended no 1 0 0
6 UPD 3672 Ended no 1 0 0
7 ENQ 1344 Ended no 1 0 0
8 BTC 2640 Ended no 1 0 0
9 BTC 3536 Ended no 1 0 0
10 BTC 3608 Ended no 1 0 0
11 SPO 3424 Ended no 1 0 0
12 UP2 2928 Ended no 1 0 0
Dispatcher Queue Statistics Sun Jan 17 04:31:57 2016
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Sun Jan 17 04:31:57 2016
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Jan 17 04:31:57 2016
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:02 2016
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >NSAP_NSR_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3920) (SOFT_KILL)
Stop icman
killing process (2172) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3920 HANDLE:712)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:03 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3920 HANDLE:712)
wait for end of icman
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:04 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:05 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:06 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:07 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:08 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:09 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:10 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:11 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:12 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:13 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2172 HANDLE:728)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=993
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jan 16 20:32:14 2016
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2172 HANDLE:728)
[DpProcDied] Process died (PID:3216 HANDLE:716)
DpStartStopMsg: send stop message (myname is >NSAP_NSR_00 <)
NiIMyHostName: hostname = 'NSAP'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Sat Jan 16 20:32:15 2016
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 784 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 784 (pos=3)
SiSelNRemove: removed sock 784
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 784
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2008) [dpxxdisp.c 10421]
Good Bye .....
Hi,
I was not able to find any information about consignment scheduling agreement.
We are a vendor and supply some companies with OE. With one of the customers we have a consignment process when we supply materials that are stored on a customer consignment stock.
Now this customer wants to have EDI and send us 830/862 EDI files.
However in our SAP we have consignment contracts but no scheduling agreement. Therefore we are not able to implement 862/830.
Is it possible to have a scheduling agreement with consignment? If yes, where I can find some information? I searched on help.sap.com but did not find anything.
What are the main steps for implementing such agreement in SAP?
Thank you very much!
Hi Experts ,
I am upgrading ECC 6 EHP 6 from Stack 5 to Stack 12 upgrading with SUM 1.0.11.5
Upgrade at Execution stopped at MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/JOB_RSVBCHCK_D as shown below ,
I guess I have to log in the system and delete/process these from extraction queue , please let me know the process to do this
Hi All,
I upgraded CRM system from 6.0 to 7.02. System is very slow and dispatcher is often getting stopped in the night time. I have posted disp trace. Please help ASAP. Kernel 7.21_EXT patch 400. SQL 2008/Windows 2008. Solman MOPZ calculated the kernel target. I also checked in PAM, that kernel release is fine for the target. "stoc check failed kernel not compatible with system (rc=-100)". I have also attached dev_ms.
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "721"
---------------------------------------------------
sysno 00
sid CRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 400
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
pid 3664
kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)
length of sys_adm_ext is 592 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3664) [dpxxdisp.c 1323]
shared lib "dw_xml.dll" version 400 successfully loaded
shared lib "dw_xtc.dll" version 400 successfully loaded
shared lib "dw_stl.dll" version 400 successfully loaded
shared lib "dw_gui.dll" version 400 successfully loaded
shared lib "dw_mdm.dll" version 400 successfully loaded
shared lib "dw_rndrt.dll" version 400 successfully loaded
shared lib "dw_abp.dll" version 400 successfully loaded
shared lib "dw_sym.dll" version 400 successfully loaded
shared lib "dw_aci.dll" version 400 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Jan 13 08:39:57 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6525]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
display_tcp_ip: 0
Set Check Logoff Flags to 0x0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPCRMDEV_CRD_00 <
DpShMCreate: sizeof(wp_adm) 49632 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 128000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1392064/1392080
DpShMCreate: sizeof(comm_adm) 1392080 (2768)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/163904/96560/260512
DpShMCreate: sizeof(slock_adm) 260512 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=4400/16/422464/422480
DpShMCreate: sizeof(file_adm) 422480 (80)
DpShMCreate: sizeof(vmc_adm) 47520 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000076C0050, size: 7984112)
DpShMCreate: allocated sys_adm at 00000000076C0060
DpShMCreate: allocated wp_adm_list at 00000000076C30B0
DpShMCreate: allocated wp_adm at 00000000076C32A0
DpShMCreate: allocated tm_adm_list at 00000000076CF490
DpShMCreate: allocated tm_adm at 00000000076CF4E0
DpShMCreate: allocated wp_ca_adm at 0000000007C123F0
DpShMCreate: allocated appc_ca_adm at 0000000007C21E00
DpShMCreate: allocated comm_adm at 0000000007C41210
DpShMCreate: allocated slock_adm at 0000000007D94FF0
DpShMCreate: allocated file_adm at 0000000007DD49A0
DpShMCreate: allocated vmc_adm_list at 0000000007E3BC00
DpShMCreate: allocated vmc_adm at 0000000007E3BCB0
DpShMCreate: allocated gw_adm at 0000000007E47660
DpShMCreate: allocated j2ee_adm at 0000000007E476A0
DpShMCreate: allocated ca_info at 0000000007E48620
DpShMCreate: allocated wall_adm at 0000000007E486B0
DpCommAttachTable: attached comm table (header=0000000007C41210/ft=0000000007C41220)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (9 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 4400 entries
DpSesCreateTable: created session table at 00000000034B0050 (len=167472)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use Mutex for locking
<ES> InitFreeList
ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2865 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 192 MB
mm.dump: set global maximum dump mem to 192 MB
EsRegisterEmCheck: Register EmGetEsHandles at 00000001402B4270
Es2ResCreate: Changed resource parameters to
filenamePrefix =
blockSizeKB = 2048 KB
initialSizeMB = 480 MB
extendSizeMB = 240 MB
maxSizeMB = 15840 MB
DpVmcSetActive: set vmc state DP_VMC_ENABLED
DpVmcSetActive: set vmc state DP_VMC_ACTIVE
DpVmcInit2: o.k.
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
*** WARNING => DpJ2eeStart: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance (info=0x301) [dpxxj2ee.c 343]
J2EE server info
start = TRUE
state = STARTED
pid = 4888
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
**LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1709]
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAPCRMDEV_CRD_00 <)
DpStartStopMsg: start msg sent
Tue Jan 13 08:39:58 2015
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Tue Jan 13 08:39:59 2015
CCMS: AlMsUpload successful for F:\usr\sap\CRD\DVEBMGS00\log\ALMTTREE.DAT (2844 MTEs).
Tue Jan 13 08:40:05 2015
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 1000 (50 %)
Tue Jan 13 08:40:37 2015
*** ERROR => [DpProcDied] Process died (PID:4888 HANDLE:952 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:40:57 2015
J2EE server info
start = TRUE
state = STARTED
pid = 3752
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:40:59 2015
DpModState: change server state from STARTING to ACTIVE
Tue Jan 13 08:41:17 2015
*** ERROR => [DpProcDied] Process died (PID:3752 HANDLE:1308 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:41:37 2015
J2EE server info
start = TRUE
state = STARTED
pid = 2496
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:41:57 2015
*** ERROR => [DpProcDied] Process died (PID:2496 HANDLE:1320 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:42:17 2015
J2EE server info
start = TRUE
state = STARTED
pid = 2120
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:42:37 2015
*** ERROR => [DpProcDied] Process died (PID:2120 HANDLE:1328 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:42:58 2015
J2EE server info
start = TRUE
state = STARTED
pid = 6024
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:43:18 2015
*** ERROR => [DpProcDied] Process died (PID:6024 HANDLE:656 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:43:38 2015
J2EE server info
start = TRUE
state = STARTED
pid = 5728
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:43:58 2015
*** ERROR => [DpProcDied] Process died (PID:5728 HANDLE:484 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:44:07 2015
*** ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: - [dpxxdisp.c 2601]
Tue Jan 13 08:44:18 2015
J2EE server info
start = TRUE
state = STARTED
pid = 6524
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:44:38 2015
*** ERROR => [DpProcDied] Process died (PID:6524 HANDLE:944 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:44:58 2015
J2EE server info
start = TRUE
state = STARTED
pid = 6692
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:45:18 2015
*** ERROR => [DpProcDied] Process died (PID:6692 HANDLE:484 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:45:21 2015
*** ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: - [dpxxdisp.c 2601]
Tue Jan 13 08:45:38 2015
J2EE server info
start = TRUE
state = STARTED
pid = 6856
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64990
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:45:58 2015
*** ERROR => [DpProcDied] Process died (PID:6856 HANDLE:656 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:46:18 2015
J2EE server info
start = TRUE
state = STARTED
pid = 7152
argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64989
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRD
argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Jan 13 08:46:38 2015
*** ERROR => [DpProcDied] Process died (PID:7152 HANDLE:1308 rc:0x0) [dpnttool2.c 147]
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jan 13 08:46:58 2015
DpEnvCheckJ2ee: switch off j2ee start flag
Tue Jan 13 09:35:56 2015
*** ERROR => 13.01.2015 14:35:56.034 PID=3664, TID=4196 SapTimer error. SapTime differs from Windows time. ERRORS: 0, SapTime-WindowsUtcTime=-85 seconds. TotalTimeCorrection=+0 sec, QpcTime-WindowsUtcTime=-85 sec (*). [dpxxdisp.c 21913]
13.01.2015 14:35:56.034 PID=3664, TID=4196 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime: -86300 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +999 millisec, WindowsUtc elapsed +87299 millisec. SapTime-WindowsUtcTime=-85 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-85736 millisec (*).
Tue Jan 13 09:40:24 2015
13.01.2015 14:40:24.480 PID=3664, TID=4196 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime: -87997 millisec (max -86300). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +88997 millisec. SapTime-WindowsUtcTime=-88 seconds. TotalTimeCorrection=+85786 millisec, QpcTime-WindowsUtcTime=-173903 millisec (*).
Tue Jan 13 09:51:17 2015
SoftCancel request for T30 U812 M0 received from IC_MAN
Tue Jan 13 09:56:48 2015
SoftCancel request for T37 U978 M0 received from IC_MAN
Tue Jan 13 09:57:59 2015
SoftCancel request for T37 U994 M0 received from IC_MAN
Tue Jan 13 10:19:25 2015
DpHdlDeadWp: W0 (pid=3736) terminated automatically
Tue Jan 13 10:45:23 2015
SoftCancel request for T33 U1231 M0 received from IC_MAN
Tue Jan 13 10:45:47 2015
DpHdlDeadWp: W0 (pid=6728) terminated automatically
Tue Jan 13 10:47:29 2015
*** WARNING => DpEnvCheck: no answer from msg server since 33 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Tue Jan 13 10:51:18 2015
*** ERROR => 13.01.2015 15:51:18.702 PID=3664, TID=4196 SapTimer warning. Took time keeping ownership. PID=3664, old owner PID:2268 [dpxxdisp.c 21913]
Tue Jan 13 10:52:29 2015
*** WARNING => DpEnvCheck: no answer from msg server since 33 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Tue Jan 13 10:52:50 2015
*** WARNING => DpEnvCheck: no answer from msg server since 54 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Tue Jan 13 10:53:11 2015
*** WARNING => DpEnvCheck: no answer from msg server since 75 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Tue Jan 13 10:53:32 2015
*** WARNING => DpEnvCheck: no answer from msg server since 96 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Tue Jan 13 11:10:33 2015
DpHdlDeadWp: W6 (pid=4084) terminated automatically
DpHdlDeadWp: W7 (pid=3220) terminated automatically
Tue Jan 13 11:49:36 2015
SoftCancel request for T33 U1879 M0 received from IC_MAN
Tue Jan 13 11:50:34 2015
DpHdlDeadWp: W2 (pid=4288) terminated automatically
Tue Jan 13 11:52:32 2015
*** ERROR => V3 already deleted [dpxxdisp.c 8106]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 33 wp_ca_blk 90 wp_id 0
-IN-- action SEND_TO_WP uid 2141 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 1108 rq_id 20595
-IN-- req_info LOGIN,MSG_WITH_REQ_BUF,MSG_WITH_OH
-IN-- vmcHdl 3 sesTab -1 vmcControlsCheckedCount 0
-IN-- msg_name SAPCRMDEV_CRD_00
Tue Jan 13 12:03:55 2015
DpHdlDeadWp: W3 (pid=4356) terminated automatically
Tue Jan 13 15:50:00 2015
SoftCancel request for T31 U2842 M0 received from IC_MAN
Tue Jan 13 15:58:03 2015
SoftCancel request for T27 U4211 M0 received from IC_MAN
SoftCancel request for T29 U4212 M0 received from IC_MAN
Tue Jan 13 17:39:04 2015
SoftCancel request for T37 U5251 M0 received from IC_MAN
SoftCancel request for T23 U5252 M0 received from IC_MAN
Tue Jan 13 17:41:53 2015
SoftCancel request for T31 U5306 M0 received from IC_MAN
SoftCancel request for T22 U5307 M0 received from IC_MAN
Tue Jan 13 20:47:22 2015
DpHdlDeadWp: W7 (pid=6344) terminated automatically
Tue Jan 13 20:58:21 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:65029: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 25/sock 968
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:65029) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Tue Jan 13 20:58:21 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 8744
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Tue Jan 13 20:58:26 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 20:58:38 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 20:59:03 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
Tue Jan 13 20:59:11 2015
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Tue Jan 13 21:00:43 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:49645: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 984
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:49645) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Tue Jan 13 21:00:43 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 8761
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Tue Jan 13 21:00:48 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 21:00:54 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 21:01:09 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
Tue Jan 13 21:01:12 2015
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
Tue Jan 13 21:01:26 2015
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
***LOG Q0I=> NiIRead: P=127.0.0.1:49717; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 27/sock 968
(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:49717; L=127.0.0.1:3200) [nixxi.cpp 5082]
DpMsgProcess: 1 server in MBUF
Tue Jan 13 21:32:09 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:49716: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1340
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:49716) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Tue Jan 13 21:32:09 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 9088
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Tue Jan 13 21:32:14 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
*** ERROR => MsISnd2: not_attached [msxxi.c 1510]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5590]
Tue Jan 13 21:32:17 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
MBUF state LOADING
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
Tue Jan 13 22:41:28 2015
***LOG Q0I=> NiIRead: P=127.0.0.1:52332; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 67/sock 944
(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:52332; L=127.0.0.1:3200) [nixxi.cpp 5082]
Tue Jan 13 22:41:42 2015
SoftCancel request for T42 U8108 M0 received from IC_MAN
Tue Jan 13 22:41:59 2015
SoftCancel request for T32 U8113 M0 received from IC_MAN
SoftCancel request for T22 U8114 M0 received from IC_MAN
Tue Jan 13 22:42:09 2015
SoftCancel request for T26 U8115 M0 received from IC_MAN
Tue Jan 13 22:43:05 2015
DpHdlDeadWp: W0 (pid=5292) terminated automatically
DpHdlDeadWp: W3 (pid=4252) terminated automatically
DpHdlDeadWp: W4 (pid=1528) terminated automatically
Tue Jan 13 22:54:19 2015
SoftCancel request for T22 U8171 M0 received from IC_MAN
Tue Jan 13 22:55:05 2015
DpHdlDeadWp: W6 (pid=6644) terminated automatically
Tue Jan 13 23:10:45 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:50690: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 1000
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:50690) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Tue Jan 13 23:10:45 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 10145
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Tue Jan 13 23:10:50 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 23:10:56 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 23:11:20 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Tue Jan 13 23:11:35 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
Tue Jan 13 23:11:42 2015
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Tue Jan 13 23:59:59 2015
SoftCancel request for T31 U8648 M0 received from IC_MAN
Wed Jan 14 00:00:00 2015
SoftCancel request for T28 U8649 M0 received from IC_MAN
Wed Jan 14 00:00:04 2015
DpRqCheck: mode 0 in status CANCEL
SoftCancel request for T31 U8648 M0 received from IC_MAN
*** ERROR => DpRqCheck: T31 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 31 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8648 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 12995
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
-IN-- msg_name -
Wed Jan 14 00:00:31 2015
***LOG Q0I=> NiIRead: P=192.168.101.90:2900; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 32/sock 988
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:2900; L=192.168.101.63:3200) [nixxi.cpp 5082]
DpRTmPrepareReq: network error of client T25, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Jan 14 00:00:40 2015
*** WARNING => DpAddrToHost: NiAddrToHost took 8422 ms [dpxxdisp.c 20855]
*** WARNING => DpAddrToHost: Disabling reverse name lookup [dpxxdisp.c 20856]
DpRTmPrepareReq: client address of T25 is 192.168.101.90(TERMSRVCRESTRON)
***LOG Q04=> DpRTmPrep, NiBufReceive (5728 SRASTOGI 25 TermSrvCrest) [dpxxdisp.c 12573]
RM-T25, U5728, 100 SRASTOGI, TermSrvCrestron, 23:59:55, M0, W5, SE16, 2/2
***LOG Q0I=> NiIRead: P=192.168.101.90:4082; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 90/sock 944
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4082; L=192.168.101.63:3200) [nixxi.cpp 5082]
***LOG Q0I=> NiIRead: P=192.168.101.90:4068; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 66/sock 1308
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4068; L=192.168.101.63:3200) [nixxi.cpp 5082]
***LOG Q0I=> NiIRead: P=192.168.101.90:4061; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 30/sock 984
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4061; L=192.168.101.63:3200) [nixxi.cpp 5082]
DpRTmPrepareReq: network error of client T34, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
DpRTmPrepareReq: client address of T34 is 192.168.101.90(192.168.101.90)
***LOG Q04=> DpRTmPrep, NiBufReceive (8644 34 TermSrvCrest) [dpxxdisp.c 12573]
RM-T34, U8644, 000 , TermSrvCrestron, 23:59:53, M0, W8, SESS, 2/0
DpRTmPrepareReq: network error of client T23, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
DpRTmPrepareReq: client address of T23 is 192.168.101.90(192.168.101.90)
***LOG Q04=> DpRTmPrep, NiBufReceive (8646 23 TermSrvCrest) [dpxxdisp.c 12573]
RM-T23, U8646, 000 , TermSrvCrestron, 23:59:54, M0, W4, SESS, 2/0
DpRTmPrepareReq: network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
DpRTmPrepareReq: client address of T42 is 192.168.101.90(192.168.101.90)
***LOG Q04=> DpRTmPrep, NiBufReceive (8647 42 TermSrvCrest) [dpxxdisp.c 12573]
RM-T42, U8647, 000 , TermSrvCrestron, 23:59:56, M0, W0, SESS, 2/0
Wed Jan 14 00:00:41 2015
DpHdlDeadWp: W1 (pid=4608) terminated automatically
Wed Jan 14 00:49:19 2015
*** WARNING => DpITimeCheck: suspicious forward jump of current time 1421214559, last time 1421211655 [dpxxdisp.c 9205]
Wed Jan 14 00:49:20 2015
DpITimeCheck: new time seems to be OK now, I accept 1421214560
*** WARNING => DpTimeCheck: huge diff between current 1421211676 and next schedule (act_time 1421214560 delay 120 [dpxxdisp.c 9379]
DpRqCheck: mode 0 in status CANCEL
*** WARNING => DpHdlSoftCancel: T28/M0 still active in W1 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]
Wed Jan 14 00:49:22 2015
SoftCancel request for T26 U8655 M0 received from REMOTE_TERMINAL
Wed Jan 14 01:08:41 2015
DpHdlDeadWp: W7 (pid=5988) terminated automatically
Wed Jan 14 01:15:12 2015
SoftCancel request for T42 U8862 M0 received from IC_MAN
SoftCancel request for T25 U8859 M0 received from IC_MAN
Wed Jan 14 01:15:30 2015
DpRqCheck: mode 0 in status CANCEL
SoftCancel request for T42 U8862 M0 received from IC_MAN
*** ERROR => DpRqCheck: T42 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 42 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8862 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21027
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
-IN-- msg_name -
***LOG Q0I=> NiIRead: P=127.0.0.1:55047; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 86/sock 1304
(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:55047; L=127.0.0.1:3200) [nixxi.cpp 5082]
Wed Jan 14 01:15:35 2015
DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)
Wed Jan 14 01:15:40 2015
DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)
Wed Jan 14 01:15:45 2015
DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)
Wed Jan 14 01:15:50 2015
DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)
Wed Jan 14 01:16:00 2015
DpRqCheck: mode 0 in status CANCEL
SoftCancel request for T25 U8859 M0 received from IC_MAN
*** ERROR => DpRqCheck: T25 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 25 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8859 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21060
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
-IN-- msg_name -
Wed Jan 14 01:20:56 2015
SoftCancel request for T22 U8887 M0 received from IC_MAN
SoftCancel request for T35 U8885 M0 received from IC_MAN
Wed Jan 14 01:21:10 2015
DpHdlDeadWp: W1 (pid=5524) terminated automatically
Wed Jan 14 01:21:24 2015
DpHdlDeadWp: W8 (pid=564) terminated automatically
***LOG Q0I=> NiIRead: P=127.0.0.1:55171; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 102/sock 1016
(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:55171; L=127.0.0.1:3200) [nixxi.cpp 5082]
Wed Jan 14 01:22:16 2015
DpRqCheck: mode 0 in status CANCEL
*** WARNING => DpHdlSoftCancel: T35/M0 still active in W1 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]
Wed Jan 14 01:22:44 2015
DpRqCheck: mode 0 in status CANCEL
Wed Jan 14 01:22:49 2015
SoftCancel request for T22 U8887 M0 received from IC_MAN
*** ERROR => DpRqCheck: T22 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 22 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8887 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21394
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
-IN-- msg_name -
Wed Jan 14 01:25:19 2015
SoftCancel request for T35 U8951 M0 received from IC_MAN
Wed Jan 14 01:25:20 2015
SoftCancel request for T22 U8954 M0 received from IC_MAN
Wed Jan 14 01:25:35 2015
DpRqCheck: mode 0 in status CANCEL
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]
-IN-- sender_id IC_MAN tid 24 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8823 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21226
-IN-- req_info DP_ICM_EVENT
-IN-- mpi read <f9d> mpi write <f9e> prot 1 obj fd -1 rq_id 0
-IN-- icm_opcode: ICM_PLUGIN_REQUEST virt_host_idx: 0
-IN-- dtrace {root-id=00505682314E1EE4A6F674B291BD340B}_{conn-id=00505682314E1EE4A6F69543410C740B}_1
-IN-- msg_name -
Wed Jan 14 01:52:12 2015
DpHdlDeadWp: W7 (pid=6772) terminated automatically
Wed Jan 14 01:54:51 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:53037: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 22/sock 1324
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:53037) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Wed Jan 14 01:54:51 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 11354
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Wed Jan 14 01:54:57 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
Wed Jan 14 01:55:08 2015
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Wed Jan 14 02:07:58 2015
*** WARNING => DpTimeCheck: skipped 1 buffer refresh requests because one is in the queue [dpxxdisp.c 9397]
Wed Jan 14 02:12:07 2015
SoftCancel request for T26 U9125 M0 received from IC_MAN
Wed Jan 14 02:41:40 2015
DpHdlDeadWp: W7 (pid=7164) terminated automatically
Wed Jan 14 03:33:27 2015
DpHdlDeadWp: W7 (pid=3892) terminated automatically
Wed Jan 14 03:44:27 2015
DpHdlDeadWp: W4 (pid=6928) terminated automatically
Wed Jan 14 03:47:47 2015
*** WARNING => DpEnvCheck: no answer from msg server since 20 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Wed Jan 14 03:48:07 2015
*** WARNING => DpEnvCheck: no answer from msg server since 40 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]
Wed Jan 14 03:48:25 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:55941: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1348
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:55941) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Wed Jan 14 03:48:25 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 12537
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Wed Jan 14 03:48:30 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 03:48:40 2015
*** ERROR => MsISnd2: not_attached [msxxi.c 1510]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5590]
Wed Jan 14 03:48:46 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
Wed Jan 14 03:48:53 2015
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Wed Jan 14 03:49:15 2015
*** WARNING => DpHdlSoftCancel: T27/M0 still active in W4 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]
Wed Jan 14 03:51:40 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:58283: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 984
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:58283) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Wed Jan 14 03:51:40 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 12564
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
SoftCancel request for T27 U10155 M0 received from IC_MAN
Wed Jan 14 03:51:45 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 03:52:20 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
***LOG Q0I=> NiIWrite: P=127.0.0.1:58350; L=127.0.0.1:3200: WSASend (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4599]
*** ERROR => NiIWrite: SiSendV failed for hdl 33/sock 1348
(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:58350; L=127.0.0.1:3200) [nixxi.cpp 4599]
*** ERROR => NiICheck: NiBufIWriteUserMsg failed (rc=-6) [nixxi.cpp 6096]
*** ERROR => NiBufIProcMsg: NiICheck failed (rc=-6) [nibuf.cpp 2027]
*** ERROR => NiBufIIn: NiBufIProcMsg failed (rc=-6) [nibuf.cpp 2951]
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Wed Jan 14 04:18:03 2015
DpHdlDeadWp: W8 (pid=6688) terminated automatically
Wed Jan 14 04:32:45 2015
SoftCancel request for T34 U10386 M0 received from IC_MAN
Wed Jan 14 04:39:05 2015
DpHdlDeadWp: W0 (pid=6904) terminated automatically
Wed Jan 14 04:56:46 2015
DpHdlDeadWp: W1 (pid=7028) terminated automatically
Wed Jan 14 05:01:47 2015
DpHdlDeadWp: W8 (pid=5276) terminated automatically
Wed Jan 14 05:18:06 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:58369: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 19/sock 984
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:58369) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Wed Jan 14 05:18:06 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 13511
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Wed Jan 14 05:18:11 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 05:18:17 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 05:18:37 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 05:18:57 2015
***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpMsgProcess: 1 server in MBUF
Wed Jan 14 05:53:07 2015
DpHdlDeadWp: W8 (pid=6128) terminated automatically
Wed Jan 14 06:08:11 2015
DpRqCheck: mode 0 in status CANCEL
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]
-IN-- sender_id IC_MAN tid 29 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 11175 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 45714
-IN-- req_info DP_ICM_EVENT
-IN-- mpi read <19e1> mpi write <19e2> prot 1 obj fd -1 rq_id 0
-IN-- icm_opcode: ICM_PLUGIN_REQUEST virt_host_idx: 0
-IN-- dtrace {root-id=00505682314E1EE4A6FB44610803940B}_{conn-id=00505682314E1EE4A6FB8DA63301940B}_1
-IN-- msg_name -
*** ERROR => DpRqCheck: T29 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 29 wp_ca_blk 226 wp_id 3
-IN-- action SEND_TO_WP uid 11175 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 45832
-IN-- req_info CANCELMODE
-IN-- msg_name -
Wed Jan 14 06:12:28 2015
DpHdlDeadWp: W1 (pid=6508) terminated automatically
Wed Jan 14 06:32:38 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:60578: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
Wed Jan 14 06:32:39 2015
*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1344
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:60578) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR Reading data from the message server (SAPCRMDEV / 3900)
* failed.
* Please check the trace file of the message server.
*
* TIME Wed Jan 14 06:32:39 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -36
* MODULE msxxi.c
* LINE 2852
* COUNTER 14236
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
MBUF state OFF
MBUF component DOWN
*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]
*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]
Wed Jan 14 06:32:44 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 06:32:49 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 06:32:59 2015
*** ERROR => DpRqCheck: T38 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 38 wp_ca_blk 272 wp_id 5
-IN-- action SEND_TO_WP uid 11318 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 48480
-IN-- req_info CANCELMODE
-IN-- msg_name -
*** ERROR => DpRqCheck: T38 in state TM_SLOT_FREE [dpxxdisp.c 8135]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]
*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]
-IN-- sender_id DISPATCHER tid 38 wp_ca_blk 451 wp_id 5
-IN-- action SEND_TO_WP uid 11318 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 48482
-IN-- req_info CANCELMODE
-IN-- msg_name -
Wed Jan 14 06:33:04 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 06:33:25 2015
*** ERROR => MsISnd2: not_attached [msxxi.c 1510]
***LOG Q0N=> DpRqNoWpHandle, MsSnd2Type () [dpxxdisp.c 5557]
Wed Jan 14 06:33:30 2015
*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Wed Jan 14 06:34:22 2015
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:62123: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 1356
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:62123) [nixxi.cpp 5082]
***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:62123: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 1356
(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:62123) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV
* ERROR The connection to the specified message server
* (SAPCRMDEV / 3900) failed. Please check the trace file
* of the message server. If a network filter has
* been activated (see message server parameters
* ms/acl_file_...) please check the configuration
*
* TIME Wed Jan 14 06:34:22 2015
* RELEASE 721
* COMPONENT MS (message handling interface, multithreaded)
* VERSION 4
* RC -35
* MODULE msxxi.c
* LINE 2861
* COUNTER 14239
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
***LOG Q1K=> MsIAttachEx: StoC check failed, Kernel not compatible with system (rc=-100) [msxxi.c 820]
*** ERROR => Kernel incompatible to already connected instances (see dev_ms for details) [dpxxdisp.c 12889]
DpHalt: shutdown server >SAPCRMDEV_CRD_00 < (normal)
DpHalt: stop work processes
Wed Jan 14 06:34:28 2015
SoftCancel request for T0 U1 M0 received from DISPATCHER
softCancel request for T22 U10574 M3 received from DISPATCHER
SoftCancel request for T39 U11246 M0 received from DISPATCHER
*** ERROR => DpHdlSoftCancel: terminal has token [dpxxdisp.c 18317]
RM-T22, U10574, 100 DKASHYAP, TermSrvCrestron, 06:32:50, M3, W1, SE24, 4/1
SoftCancel request for T35 U11340 M0 received from DISPATCHER
SoftCancel request for T15 U16 M0 received from DISPATCHER
Wed Jan 14 06:35:29 2015
*** ERROR => DpWpKill(5956, SIGUSR2): kill failed [dpxxtool.c 2792]
DpHalt: stop gateway
DpHalt: stop icman
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: waiting for termination of work processes ...
Wed Jan 14 06:35:30 2015
DpHalt: waiting for termination of work processes ...
Wed Jan 14 06:35:31 2015
DpHalt: waiting for termination of work processes ...
Wed Jan 14 06:35:32 2015
DpHalt: waiting for termination of work processes ...
Wed Jan 14 06:35:33 2015
DpHalt: waiting for termination of work processes ...
Wed Jan 14 06:35:34 2015
pHalt: wait for end of gateway
*** ERROR => [DpProcDied] Process died (PID:880 HANDLE:948 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
*** ERROR => [DpProcDied] Process died (PID:4132 HANDLE:956 rc:0x0) [dpnttool2.c 147]
DpHalt: not attached to the message server
DpHalt: cleanup EM
Wed Jan 14 06:35:35 2015
***LOG Q05=> DpHalt, DPStop ( 3664) [dpxxdisp.c 11819]
Thanks,
Kavitha Rajan.
Dear experts,
I created one notification on 12-01-2015,created shutdown maintenance order on 15-01-2015 and i have taken 3 materials for required operation.
i did not confirm the order on 15-01-2015.i confirm the order on 17-01-2015,now my basic start date and finish date showing current date.
please anyone explain this.
Thanks,
Sunil Boya
Hi Team,
We are getting following dump error while restoring the environment.
Dump message says that there are some BPC tables exist in $TMP.
Please help me how to resolve it?
Following screenshot shows the tables exist in $TMP.
Thanks,
Naidu
HI Experts,
Currently i am working in production system(GO live Phase),i have to load data to cube. I have one main process chain with 4 local chains. I want to know what is the program name to run the PC in production automatically and also how?
Please give me your valuable inputs,its urgent.
Regards
Ram
Hi Experts,
I want to store data on Hana Cloud so that i can fetch it through my SAPUI5 application. Is it possible??
Hi Experts,
I have created a custom report which displays the output in ALV container on the screen. I am using the new way of implementing this by using CL_SALV_TABLE.
The ALV output has 5 columns, i need the fifth column to be a drop down button.
How can I create this drop down?
The values for this drop down need to be fetched dynamically from another custom table based on the value in the first column.
For example,
my structure is
TYPES : BEGIN OF ty_disp,
bpcontact TYPE ct_contact,
acttxt TYPE ct_acttxt,
ernam TYPE ernam,
erdat TYPE erdat,
reason TYPE string, --> This needs to have a drop down button
END OF ty_disp.
Depending on the value of bpcontact, i need to fetch the value for reason from a different table, so each row in the ALV would have different values in the drop down.
Has anyone implemented such a functionality?
Good Afternoon
According to our auditors the Israel government has aksed some years ago all ERP software vendors to implement a structured format that will be used during a tax audit to extract the data and transmit it to the authorities.
Though we have the country version Israel implemented and active ( VAT reporting, WH tax reporting ... ), I cannot find anything related to tax audit.
For other subsidiaries we use DART in this case.
Anybody aware what the standard SAP answer in this case?
Is there content in the service market place somewhere to have additional explanations?
Best regards
Markus Hittenberger
Hi,
When I am trying to click LOAD in Data provisioning , I am getting below error.
Load request
SAP DBTech JDBC: [258]: insufficient privilege: Not authorized
Can someone please help?
BR
Sumeet
Kernel in SAP
Kernel contains the executable files. It contains those files which are used to run every event in SAP. Example: starting database, shutdowns of database, starting sap, shutdown of sap, saposcol, to uncar the sap files etc.
The applications are coded and run in an OS and DB-independent manner. Thus, the kernel of an SAP system consists of all native programs and dynamic libraries that are required for launching the Runtime, executing ABAP or Java codes, communicating with the outside world of the application server like OS, DB and network. These native binaries can be categorized through different aspects:
DB-dependent vs. DB-independent:
Unicode vs. Non-Unicode:
Primary vs. subsidiary:
The SAP R/3 or J2EE engine kernel consists of executable that are directly used by the SAP processes, by the database administration utilities, or by the installation programs etc. Some of these programs can be very useful even when the SAP system is down. The SAPCPEprocess will make sure that once the kernel upgrade is done, the kernel files are in synch in all the locations.
Location
In a standard standalone SAP server the kernel or runtime directory is
/usr/sap/<SID>/SYS/exe/uc
Some important kernel files in sap
R3trans_164-20000978.SAR: R3trans_164-20000978.SAR' is a compressed archive with the latest version of R3trans from the SAP Service Marketplace, used when we patched the kernel.
SAPCAR: SAP Compression and Archiving program
Cleanipc: Cleans Inter-Process Communications Memory
Disp+work: Dispatcher & Workprocess - "The complete Kernel" - Here the complete ABAP is processed.
Dpj2ee: Dispatcher for Java
Dpmon: Used to get the process overview of an instance in text mode.
Enserver: SAP Enqueue Server
Jcmon: Program to monitor and manage Java processes
Jcontrol: Program to control Java processes
jenqulib.jar: Java Enqueue Library
jlaunch: Program starts the Java processes.
Rfcping: Ping the RFC layer.
sapccm4x: CCMS Agent for Abap
sapccmsr: CCMS Agent for Java
sapcontrol: 'sapcontrol' is used to stop/start/monitor the sap instances (for example, from the sapmc).
Sapstart: Starts SAP processes
Sapstartsrv: Starts SAP processes.
startdb Program to start the database
startj2eedb Program to start the database (Java)
startrfc: The tool is a very easy SAP command line interface to start all of the implemented function modules of SAP systems.
Startsap: Program to start SAP
stopdb: Program to stop the database
stopj2eedb: Program to stop the database (Java)
stopsap: Program to stop SAP
tp: The Transport Tool. This program coordinates the complete import and export of program and table changes made within the SAP system in order to transport them through the complete System Landscape.
icmadmin.SAR: Tool to monitor and manage the Internet Communication Manager (ICM) from the SAP System (transaction SMICM).
Icman: Tool to monitor and manage the Internet Communication Manager (ICM) from the SAP System (transaction SMICM).
Icmbnd: Program to bind ports with numbers from 0 to 1023
Icmon: Internet Communication Manager (ICM) used for HTTP(S), SMTP based communication used to monitor and manage the Internet Communication Manager (ICM) from the SAP System (transaction SMICM).
instance.lst List of database-independent executables. These executables are valid for all database systems used by the SAP system.
Instancedb.lst List of database-dependent executables. These executables can only be used with a particular database system.
Kernel Upgrade Process:
1. Find the current version of the kernel (Any one step)
2. Know about Unicode or non-Unicode (Any one step) TP –V from command prompt Winmsd from command prompt Isainfo –v in Unix SE38 run report RSPARAM RSPFPAR3. Download the kernel according to your need from SAP Market place http://service.sap.com/swdc--->Support Packages and Patches --->SAP NetWeaver ---> SAP NETWEAVER---> SAP NETWEAVER 7.0 (2004S) ---> Entry by Component---> Application Server Java--->SAP Kernel 7.00 32 bit UNICODE4. Backup of the Existing Kernel5. Uncar the .SAR files in any location SAPCAR -xvf <filename.SAR> Ex: - /usr/sap/<SID>/SYS/exe/uc/NTAMD64_NEWNote in case of errorRename the SAPCAR file to SAPCAROLD and then extract the kernel files again: SAPCAROLD.EXE -xvf <filename.SAR>6. Bring SAP and OS COLLECTOR down: Stop sap from MMC In windows, stop the SAPOSCOL (Start-> run-> services.msc)In Unix servers, stop the SAPOSCOL use the command:saposcol –kNote: SAPOSCOL service should be stopped because it also will get overwritten by the new file. Also, in UNIX servers, the owner of SAPOSCOL service is the user "root". In this case, you will have to login as "root" user and stop the service.7. Copy the new kernel files to the KERNAL LOCATION folder location EXA:-
8. Bring SAP and OS COLLECTOR UP:
Start sap from MMC
In windows, start the SAPOSCOL (Start-> run-> services.msc)
In Unix servers, start the SAPOSCOL use the command:
saposcol –l
9. From command prompt enter disk+work for check kernel version which have been upgrade
10. Check DB connection using R3trans -d
Kernel Upgrade in general
1. kernel Location usr\sap\<sid>\sys\exe\uc in Linux /usr/sap/SID/DVE/exe
2. Download Location Software Downloads? SAP Software Download Center ->My company’s Application components -> Complementary Software -> SAP KERNEL 64-Bit Unicode -> SAP KERNEL 7.20 64-BIT UNICODE
3. Stop sap= Stopsap
4. stoposcol stop = saposcol -k
5. Yes, if u have unix system u need to run a script, saproot.sh <SID> (it is for oracle Permissions for DBA tools BR*Tools and SAPDBA) in some cases we also need to copy kernel file manually to local instance exe folder because in some case sapcpe not work. (/usr/sap/SID/DVEM…/exe, usr/sap/SID/SCS00/exe)
Hi Everyone,
I am currently building a report in disclosure management which includes a lot of charts. The client uses the PDF output option a lot and it is important that the formatting is consistent. However when previewing the entire report as a PDF the charts do not have rounded corners, as they do in the word documents for each chapter.
I am aware that if you preview the entire report as a word doc, before saving as a PDF, the isue does not arise - however I would like to see the correct formatting when previewing straight to PDF.
Has anyone else seen this problem?.. and know of a fix?
Any information or advice would be really appreciated.
Thank you,
Jack
Dear All,
What is the difference between keeping the prompts in universe level and webi report level?
I am connecting hadoop DB with Business objects, where my data's are very high. Need to know how to fetch only the records what i need from the prompts, so what will happen if i keep the prompts in universe or webi report.
Regards,
SumanT